 |
 |
|
<< Back to Road Products
All items are made using 100% carbon fibre & laminated using an ultra clear UV protected resin. All items are 'show the weave'. We can modify any of these products to customer requirements or produce 'one-offs'. Contact us for details.
Click here for information on how to order from us.
|
|
 |
|
Bulkhead blanking panel - £80
A direct replacement for the OEM item, made to exactly the same shape, size and thickness as the original... just much lighter!
All items are finished in 2pack gloss and polished.
Weight - 100g
click here for larger picture
|
|
 |
|
998 Top Radiator Bracket - £35
Lightweight and very strong, this add a racey feel to any engine bay. Made with 9 layers of carbon fibre, supplied 2pack glossed and with rubber gromits.
Weight - 15g
click here for larger picture
|
|
 |
|
Radiator Cowling - £225
These are exact copies of the OEM item, which is now very expensive to buy new. Will work perfectly in any mini from concours to race track.Stainless fitting bolts and well nuts are supplied. All items are finished in 2pack gloss and polished.
Weight - 150g
click here for larger picture
|
|
 |
|
K series Spark Plug Cover - £40
Made using 3 layers of carbon fibre and can be made to any shape and with or without the slots. All items are finished in 2pack gloss and polished.
Weight - 15g
click here for larger picture
|
|
 |
|
1275 Top Radiator Bracket - £35
Lightweight and very strong, this add a racey feel to any engine bay. Made with 9 layers of carbon fibre, supplied 2pack glossed and with rubber gromits.
Weight - 15g
click here for larger picture
|
|
 |
|
4 Blade Fan - £110
A two or four blade tropical spec fan, dramatically increased cooling efficiency, over the standard 11 blade fan. Made using 6 layers of Carbon Fibre, making them very strong and will not shatter like the OEM item. All items are finished in 2pack gloss and polished.
Weight - 30g each
click here for larger picture
|
|
 |
|
Air Vent Covers - £20 a set of three
3 air vent covers to block off the 2 fresh air vents and cold air intake for the heater, when not used. one large and two small. All items are finished in 2pack gloss and polished.
Weight - 10g each
click here for larger picture
|
|
 |
|
Distributor Clamp A+ - £55
Made using 10 layers of Carbon Fibre, and is a direct replacement for the unnecessarily heavy OEM item. All items are finished in 2pack gloss and polished.
Weight - 10g
click here for larger picture
|
|
 |
|
Pipes - from £45
Can be made in most sizes and a lenghts, and degrees of bend. Please ask for more information. All items are finished in 2pack gloss and polished.
Weight - Varied
click here for larger picture
|
|
