 |
 |
|
<< Back to Race Products
All items are made using 100% carbon fibre & laminated using an ultra clear UV protected resin. All items are 'show the weave'. We can modify any of these products to customer requirements or produce 'one-offs'. Contact us for details.
Click here for information on how to order from us.
|
|
 |
|
'Jim White' Aero Arches - £360
Brand New Design by us, designed using knowledge gained from wind tunnel testing. These wheel arches will fit over any width of wheel up to 10" wide, and works with 10" - 13" diameter wheel. Designed to be used with a splitter and Air dam, but can easily be trimmed off short to give the look of the Sportspack Arch. we supply arches with a fitting kit, which includes: 20 Billet alloy hinged brackets, rubber edging strip, stainless nuts and bolts, 3M glue, fitting instructions and a saw blade, so that you can fit them yourself or we can help with the fitting (ask for details). All items are finished in 2pack gloss and polished.
Weight - 600g
click here for larger picture
|
|
 |
|
Custom Adjustable Diffusers - email us
You name it... we design and build it, can be built with any number of tunnels and adjustable from 0 - 14 degrees ramp. Can be made to fit around any design of exhaust system, subframe, rear beam, or anti roll bar. All items are finished in 2pack gloss and polished.
click here for larger picture
|
|
|
|
 |
|
5 Tunnel Diffuser - £750
Designed to give greater down force and grip at speed, also cleaning up the airflow in the rear section of the car giving a higher top speed. Was originally designed to fit a Z cars rear engined mini but will fit on any Mini without modifications, and attaches to the rear edge of the floor and the rear bumper lip. Can be supplied with any combination of tunnels and widths. All items are finished in 2pack gloss and polished.
Weight - 2kg
click here for larger picture
|
|
|
|
 |
|
3 Tunnel Diffuser - £690
Designed to give greater down force and grip at speed, also cleaning up the airflow in the rear section of the car giving a higher top speed. Will fit on any Mini without any modifications, and attaches to the rear edge of the floor and the rear bumper lip. As used by Jim White Gurston Downs Hill Climb Champion 2008. All items are finished in 2pack gloss and polished.
Weight - 2kg
click here for larger picture
|
|
|
|
|
|
|
 |
|
Custom Splitters - email us
Any design of splitter can be made, from 150mm - 10mm in length and can extend out to the width of the wheels or to the width of the front valance. Also can be build in any thickness using foam cores. Can be build to extend back under the engine to a flat floor or to finish at the toe board. Please contact us to discuss your ideas and we can design and build it for you. All items are finished in 2pack gloss and polished.
click here for larger picture
|
|
 |
|
Custom Airdams - email us
Can be made to fit on to Saloon or Clubman front, and has great aerodynamic features. Please contact us to discuss your ideas and we can design and build it for you. All items are finished in 2pack gloss and polished.
click here for larger picture
|
|
 |
|
Custom Grill blanks - email us
Can be made to fit on to Saloon or Clubman front, and has great aerodynamic features. Please contact us to discuss your ideas and we can design and build it for you. All items are finished in 2pack gloss and polished.
click here for larger picture
|
|
 |
|
A panel vents - £160 a pair
Carbon Fibre smooth vents to release pressure build up from inside the wheel arches to the low pressure area down the side of the car, and reducing drag. Made using 3 layers of carbon fibre and attaches using wellnuts and rubber gasket supplied. All items are finished in 2pack glosscoat and polished.
Weight - 40g each
click here for larger picture
|
|
 |
|
Small Air Scoop - £95 each or £180 a pair
An offset cooling air inlet which measures 170mm x 80mm and has a 50mm connection pipe. All items are finished in 2pack gloss and polished.
Weight - 40g
click here for larger picture
|
|
 |
|
Head Lamp Domed Blanks - £50 each or £95 a pair
Made using 3 layers of carbon, and have a flat backing plate to mount them with. Supplied with 4 wellnuts mounted in the correct place so they will line up with head lamp mounting holes, and stainless steel bolts.
All items are finished in 2pack gloss and polished.
Weight - 100g each
click here for larger picture
|
|
 |
|
Head Lamp Intake Scoops - £110 each or £205 a pair
Made using 3 layers of carbon, and have a flat backing plate to mount them with. Supplied with 4 wellnuts mounted in the correct place so they will line up with head lamp mounting holes, and stainless steel bolts.
All items are finished in 2pack gloss and polished.
Weight - 180g each
click here for larger picture
|
|
 |
|
Front Indicator Blanks - £65 per pair
Made using 3 layers of carbon, and have a flat backing plate to mount them with. Supplied with 2 wellnuts and stainless steel bolts. All items are finished in 2pack gloss and polished.
Weight - 20g each
click here for larger picture
|
|
 |
|
Rear Light Blanks - £65 per pair
Made using 3 layers of carbon, and are supplied with stainless steel fixing bolts. All items are finished in 2pack gloss and polished.
Weight - 30g each
click here for larger picture
|
|
