 |
|
 |
|
|
|
||||||||||||
We can make either flat panels 1-5mm thick in 100% carbon fibre or can make thicker panels with radiused edges using a 200 gsm biofoam core. All panels are made so any gauges can be fitted with the original fixings. We are happy to offer a fitting service for anyone in the south of England. Contact us for more information and pricing. Click on a picture below for a larger version Page updated 13 January 2012 |
 |
||||||||||||||||
|
|||||||||||||||||
|
Andy Crabb's RingCat 22
Andy is currently refitting a classic RingCat 22 and wanted something special to set the interior off. We produced him a set of 5 dash board panels to hide original holes cut in the helm and enable him to reposition the new instruments. They were supplied with all the new instrument holes cut ready for the new gauges to drop in using all the OEM fittings. All items were finished in 2x2 Twill Carbon Fibre and 2pack Glosscoat. |
|
 |
|||||||||||||||
|
|||||||||||||||||
 |
|
 |
|
 |
|||||||||||||
|
|||||||||||||||||
 |
|||||||||||||||||
|
|||||||||||||||||
|
Paul's 50 foot Sunseeker Camargue
A Single piece bespoke carbon fibre dashboard. Paul wanted to mount two large chart plotters across the main panel, these had to be angled towards the driver to stop the glare off the screens and they needed to sunk into the face of the dash. It has been manufactured using a SP systems non-gasing M foam layered between carbon fibre, all using marine grade resins. Finished in 2x2 Twill Carbon Fibre and a durable 2pack gloss lacquer, to give a finish that is completely air bubble and pin hole free that will last the life of the boat without deteriorating. |
|
 |
|||||||||||||||
|
|||||||||||||||||
 |
|
 |
|
 |
|||||||||||||
|
|||||||||||||||||
 |
|||||||||||||||||
|
|||||||||||||||||
 |
|
 |
|
 |
|||||||||||||
|
|||||||||||||||||
 |
|
 |
|
 |
|||||||||||||
|
|||||||||||||||||
 |
|
 |
|
 |
|||||||||||||
|
|||||||||||||||||
 |
|
 |
|
|
|||||||||||||
|
|||||||||||||||||
|
Cougar Marine's 12m Race Boat 'Argentunm'
We produced the dash panels for Cougars brand new race boat, built to compete in the Cowes to Torquay, and Cowes to Monte Carlo marathon races.
The dash panels have sixty seven precisely cut holes, and also feature white labeling which is sealed underneath the lacquer. The dash is a 2mm thick carbon laminate finished in 2x2 Twill carbon fibre and 2pack glosscoat. |
|
 |
|||||||||||||||
|
|||||||||||||||||
 |
|
 |
|
 |
|||||||||||||
|
|||||||||||||||||
 |
|||||||||||||||||
|
|||||||||||||||||
|
Garrick's Extreme 24
A Single carbon fibre dash panel with eight precisely cut holes. The dash is a 2mm thick carbon laminate and was made so all the original gauges could be fitted exactly as standard. This dash board was designed to replace the stainless steel dash, and modernise the boat. Finished in 2x2 Twill Carbon Fibre and 2pack Glosscoat. |
|
 |
|||||||||||||||
|
|||||||||||||||||
 |
|
 |
|
 |
|||||||||||||
|
|||||||||||||||||
 |
|||||||||||||||||
|
|||||||||||||||||
|
Gary's Baja Performance 27
A four piece carbon fibre dash with twenty six holes, cut precisely so all the original gauges and switches could be fitted exactly as standard. The dash is a 2mm thick carbon laminate and is designed to replace the original corroded panels, and modernise the boat. Made in 2x2 Twill Carbon Fibre and they are 2pack glosscoated. |
|
 |
|||||||||||||||
|
|||||||||||||||||
 |
|
 |
|
 |
|||||||||||||
|
|||||||||||||||||
|
Dave's Princess V42
A four piece carbon fibre dash board, including a glove box and radiused top edge. The original dash was aluminum with a wood effect laminate bonded on top, which like many others, had started de-laminating and aged the boats interior. We made a 1.5mm thick carbon fibre laminate and bonded it to the original aluminum backing plate which included all of the instrument fixings. The finished dash transformed the interior of the boat and really brought it up to date. Finished in 2x2 Twill Carbon Fibre and 2pack Glosscoat. |
|
 |
|||||||||||||||
|
|||||||||||||||||
 |
|
 |
|
 |
|||||||||||||
|
|||||||||||||||||
 |
|||||||||||||||||
|
|||||||||||||||||
 |
|
 |
|
 |
|||||||||||||
|
|||||||||||||||||
 |
|
 |
|
 |
|||||||||||||
|
|||||||||||||||||
 |
|
 |
|
 |
|||||||||||||
|
|||||||||||||||||
 |
|
 |
|
 |
|||||||||||||
|
|||||||||||||||||
 |
|
 |
|
|
|||||||||||||
|
|||||||||||||||||
| Exported Princess V42 A four piece carbon fibre dash board, including a hinged glove box cover and radiused top edge. This dash board was needed within 14 days to be fitted to V42 before being exported by road to Sweden. We produced all the panels to exactly the same high quality as our previous carbon fibre V42 dash but with a fast turn around. Finished in 2x2 Twill Carbon Fibre and 2pack Glosscoat. |
|
|
|||||||||||||||
|
|||||||||||||||||
 |
|
 |
|
 |
|||||||||||||
|
|||||||||||||||||
 |
|
|
|
|
|||||||||||||
|
|||||||||||||||||
|
Stuart's 47 foot Sunseeker Portofino
A two piece foam cored carbon fibre dashboard that is 12mm thick and has a 12mm radiused edge. Finished with all 18 gauges now fitted with Volvo Penta chrome bezel kits. The dash is precisely molded to fit into the original recesses with no mods to the boat or gauges. We handled all the removal and fitting on the new dash. Finished in 2x2 Twill Carbon Fibre and 2pack Glosscoat. |
|
|
|||||||||||||||
|
|||||||||||||||||
 |
|
 |
|
 |
|||||||||||||
|
|||||||||||||||||
 |
|||||||||||||||||
|
|||||||||||||||||
 |
|
 |
|
 |
|||||||||||||
|
|||||||||||||||||
 |
|
 |
|
 |
|||||||||||||
|
|||||||||||||||||
|
Jerry's Sealine C39 40 foot Luxury Cruiser
A seven piece Foam Cored Carbon Fibre dashboard that is 12mm thick and has a 12mm radiused edge. Finished with all 51 switches and gauges that fit into 32 hand cut holes, shaped to fit into original recesses with no mods to the boat or gauges. Finished in 2x2 Twill Carbon Fibre and 2pack Glosscoat. Stage 1 of Jerrys carbon fibre dashboard |
|
 |
|||||||||||||||
|
|||||||||||||||||
 |
|
 |
|
 |
|||||||||||||
|
|||||||||||||||||
 |
|||||||||||||||||
|
|||||||||||||||||
 |
|
 |
|
 |
|||||||||||||
|
|||||||||||||||||
 |
|
 |
|
 |
|||||||||||||
|
|||||||||||||||||
 |
|
 |
|
||||||||||||||
|
|||||||||||||||||
|
Stage 2 of Jerrys carbon fibre dashboard
|
|||||||||||||||||
|
|||||||||||||||||
 |
|
 |
|
 |
|||||||||||||
|
|||||||||||||||||
 |
|
 |
|
 |
|||||||||||||
|
|||||||||||||||||
 |
|
 |
|
|
|||||||||||||
|
|||||||||||||||||
|
Dimitri's 50 foot Sunseeker Camargue
A two piece carbon fibre dash board plus a trim panel. The dash pieces are a 5mm thick carbon laminate and include bespoke made alloy fixings and mounting blocks. This dash board was designed to replace the tired and pealing old wood dash, and modernise the boat. It was made so that all existing gauges and controls can be fitted without having to be modified. Finished in 2x2 Twill Carbon Fibre and 2pack Glosscoat. |
|
|
|||||||||||||||
|
|||||||||||||||||
 |
|
 |
|
 |
|||||||||||||
|
|||||||||||||||||
 |
|||||||||||||||||
|
|||||||||||||||||
 |
|
 |
|
 |
|||||||||||||
|
|||||||||||||||||
 |
|
 |
|
 |
|||||||||||||
|
|||||||||||||||||
 |
|
 |
|
 |
|||||||||||||
|
|||||||||||||||||
Here are some boat dashboards we have produced recently. They have all been made using a crystal clear marine grade resin and some also use a marine spec bio-foam core. These have all been made either as direct replacements or custom shaped new interior panels. All items are finished in hard 2pack glosscoat and polished for a lasting shine that will not degrade in the harshest of marine environments.